Luoyang Huigong Bearing Technology Co., Ltd.
Product Catalog
Contact US
Address: No.19, Guanlin West Road,S&T Industry Park of Luolong District, Luoyang City, Henan Province, P.R.China
TEL: 86-379-65793878
FAX : 86-379-65793877
Home > Products > thin section custom made bearings

thin section custom made bearings

  • Thin Section Four Point Contact Bearings

    Contact NowThin Section Four Point Contact BearingsType X --Four Point Contact
    Series:HKAA--HKG(1"x1")
    Load: Bearings that can withstand multiple loads - radial load, double row thrust load and overturning moment, and can accommodate complex load conditions.
    Read More

  • Single Row Angular Contact Ball Bearings

    Contact NowSingle Row Angular Contact Ball BearingsThe single-row angular contact ball bearing can carry the axial load in one specific direction. Its axial load capacity is determined by its contact angle α. The larger the contact angle is, the stronger the axial load capacity is. The nominal contact angles include 15°, 25°, and 40°.
    inner: 150mm-1400mm
    outer: 190mm-1700mm
    Weight:1.15kg-615kg
    Read More

  • Deep Groove Ball Bearings

    Contact NowDeep Groove Ball BearingsThe deep groove ball bearing is the most widely used rolling bearing as the simple structure and convenient using. It is mainly carry radial loads. By means of increasing the rib height coefficient and the radial clearance, etc., the deep groove ball bearing may have a certain performance of the angular contact ball bearing, it can bear a certain axial load.
    inner: 150mm-1400mm
    outer: 190mm-1700mm
    Weight:1.15kg-615kg
    Read More

  • Thin Section Angular Contact Bearings

    Contact NowThin Section Angular Contact BearingsType A -- angular contact
    Series:HKAA(3/16"x3/16")--HKG(1"x1")
    Load:The bearing Can withstand radial load and a single direction thrust load; usually the single row angular contact bearing should be matched with the other bearing with the same structure to bear the axial load in the opposite direction . After purchasing, the bearing should be adjusted at the time of installation, so that the operating clearance or preload to achieve the needed rang. If the user makes a request, CHG can also be supplied in group.
    Read More