Luoyang Huigong Bearing Technology Co., Ltd.
Product Catalog
Contact US
Address: No.19, Guanlin West Road,S&T Industry Park of Luolong District, Luoyang City, Henan Province, P.R.China
TEL: 86-379-65793878
FAX : 86-379-65793877
Home > Products > cross roller slewing ring

cross roller slewing ring

  • HRB Series Crossed Cylindrical Roller Bearing

    Contact NowHRB Series Crossed Cylindrical Roller BearingHRB crossed roller bearing series (outer ring division type with inner rotating), this type is the basic type of crossed roller bearings. The outer rings have two parts, and the inner ring is one integer. The type is well applied to the situation which need high rotation accuracy on inner ring. For example, it is suitable for the rotary part of the indexing table of the tools machine.
    inner: 30mm-1250mm
    outer: 55mm-1500mm
    Read More

  • Full Complement Roller Bearings

    Contact NowFull Complement Roller BearingsThe full complement cylindrical roller bearing has one or two raceways full of rollers and without cage, which makes it suitable for very heavy radial loads at moderate speeds. Comparing with bearings with a cage can accommodate heavy radial loads and operate at high speeds, the full complement cylindrical roller bearing is mainly applicable to low-speed cases and usually produces loud noises.
    Inner:150mm-1000mm
    Outer:210mm-1220mm
    Read More

  • Four Row Tapered Roller Bearings

    Contact NowFour Row Tapered Roller BearingsThe four row taper roller bearing is a most commom radial roll bearing.A bearing with such structure has a high bearing capacity and can bear the combined load which is mainly consisted by the radial load.Its radial loading capacity is 2.5-3.5 times that of a single-row bearings.
    Inner:150mm-1580mm
    Outer:210mm-1960mm
    Read More

  • Four Row Cylindrical Roller Bearings

    Contact NowFour Row Cylindrical Roller Bearingsseries: FC, FCD,
    As the most important roll bearing in metallurgical equipment,the four row cylindrical roller bearing has compact structure, high stiffness, and high bearing capacity, which is widely as rolling mill bearing. Inner:90mm-1400mm
    Outer:140mm-1900mm
    Read More

  • HSX Series Crossed Cylindrical Roller Bearing

    Contact NowHSX Series Crossed Cylindrical Roller BearingHSX crossed roller bearing series(outer ring division type with inner rotating, thin section),this type has smaller section than HRB series. Due to the extremely thin structure, there is no mounting holes on the outer ring and the inner ring, so the model requires a presser flange or housing.
    inner: 70mm-500mm
    outer: 90mm-620mm
    Weight:0.3kg-44kg
    Read More

  • HRA Series Crossed Cylindrical Roller Bearing

    Contact NowHRA Series Crossed Cylindrical Roller BearingHRA series is a kind of small size and light weight cross roller bearing which the wall thickness is thinner. it is small and can with stand heavy load. So bearing housing and presser flange can be light wight. It can be suited for the hand location of the robots used in the rotary location.
    inner:50mm-200mm
    outer:226mm-1820mm
    Read More

  • Double Row Tapered Roller Bearings

    Contact NowDouble Row Tapered Roller BearingsThe double row taper roller bearing is mainly used to support the combined load mainly by the radial load. It can limit the axial displacement in both directions of the shaft or housing, to be used as a double direction locating bearing.
    Inner:150mm-1778mm
    Outer:210mm-2159mm
    Read More

  • Single Row Cylindrical Roller Bearings

    Contact NowSingle Row Cylindrical Roller Bearingsseries: N,NU, NJ, NF
    The single row cylindrical roller bearing is a separable type bearing that is mainly used to support radial loading. Generally the roller is consist of two ribs, cage, roller and guided rings to be one unit, can be separated from the other ring. Inner:120mm-1900mm
    Outer:180mm-2300mm
    Weight:2.96kg-1480kg
    Read More

  • Double Row Cylindrical Roller Bearings

    Contact NowDouble Row Cylindrical Roller Bearingsseries: N,NU, NJ, NF
    The double row cylindrical roller bearing is designed as separable type bearing, which makes it easy to be mounted and dismounted. It is produced in two structures with cylindrical bore and tapered bore (suffix K), two designs NNU and NN. The NN design is consist of one inner ring with two ribs and one outer ring without ribs. The NNU design is consist of one inner ring without ribs and one outer ring with two ribs. Inner:200mm-1500mm
    Outer:280mm-2300mm
    Weight:10.6kg-12300kg
    Read More

  • 618(Ball) Serise Bearing & N18(Roller) Series Bearing

    Contact Now618(Ball) Serise Bearing & N18(Roller) Series Bearing618(Ball) Serise Bearing & N18(Roller) Series Bearing
    From the beginning of designing and developing Tubular, our company took achieving imported bearing performance as our goal. After development of more than a decade, we have developed bearings 61868, 61880, 61892, 61896, 618/530, 618/630, 618/750, 618/850, 618/980, which have gained high recognition and good reputation among our customers. Currently the Tubular bearing in our company has formed our own features: high speed, high accuracy, long service life, low vibration and low noise. outer: 250mm-1820mm
    Weight:2.67kg-780kg
    Read More